Androgroup Elevator Ltd is the authorized distributor for TK Elevator; providing premium products delivered on time at an affordable price. Every elevator install is unique, our team can help you through every stage and detail to determine what elevators best fit your needs.
TK Elevator endura
endura A – Above ground hydraulic elevator system: smooth, quiet, and efficient and exceeds the demands of today’s low-rise buildings. This product requires no drilling and features a twinpost jack to move the elevator.
endura MRL – Machine room-less option: simplified installation, fewer moving parts and lower maintenance cost. The pump unit is located in the pit. Battery lowering operation is included.
Travel: low-rise up to 48 feet 3 ½ inches
Speed (fpm): 80-150
Capacity: Passenger elevators 2100-4000 lbs Service elevators 4500-5000H lbs
Twinpost above-ground 1-stage – This is the first level of above ground jack configuration available and it features only one section of plunger that extends out of the cylinder. It is a perfect fit for a two-stop building with travel below 12’-8” with minimum pit and overhead or up to 18’-11” with a small increase in pit and/or overhead.
Twinpost above-ground 2-stage – This configuration offers greater travel capabilities because of the telescoping sections. Instead of one section of plunger to extend up, there are two sections, thus allowing for almost twice the distance in travel being reached. This series is great for buildings with travel up to 23’-2.5” with minimum pit and overhead or up to 28’-6” with a small increase in pit and/or overhead.
Twinpost above-ground 3-stage – This configuration provides the maximum height for hydraulic elevators. Its 3 stage telescoping design is capable of reaching travel distances of up to 33’-6.5” of travel with minimum pit and overhead. However, travel heights up to 48’-3.5” are obtainable with a small increase in pit depth and/or overhead height.
TK Elevator evolution
Machine room-less elevator for low-to mid-rise buildings: increased speed, capacity, efficiency and everything fits into the hoistway. Installation is hassle-free. Regenerative drive and electronic auto-rescue come standard.
Travel: low to mid-rise up to 350 feet
Speed (fpm): 200-600
Capacity: Passenger elevators 2100-4000 lbs Service elevators 4500-5000H lbs
Evolution 200 – For building up to 350 feet, this traction MRL elevator comes without compromises. You can now have up to a 5000-pound capacity elevator and still go 600 fpm. It uses flat belts instead of ropes. This improves ride quality, allows for smaller components and helps make it the industry’s quietest ride. The controller is located in the door jamb, saving space.
TK Elevator synergy
Building Supported machine room-less elevator for low-to mid-rise buildings: maximize building space and energy consumption. Relying on support from the building structure allows for greater flexibility in configuration, load capacity, speed and aesthetic options. Synergy features advanced regenerative drive technology, which captures generated power and feeds it back into the buildings electrical grid, reducing energy cost.
Travel: low to mid-rise up to 300 feet
Speed (fpm): 200-500
Capacity: Passenger elevators 2100-4000 lbs Service elevators 4500-5000H lbs
TK Elevator momentum
Gearless traction elevator for high-rise buildings: elevator that moves with precision and speed while remaining energy efficient and reliable. Elevator machine room located above the hoistway allowing for maximum travel distances and easy access for maintenance.
Momentum Standard
Travel: high-rise up to 300 feet
Speed (fpm): 350-500
Capacity: Passenger elevators 2100-4000 lbs Service elevators 4500-5000H lbs
Momentum Performance
Travel: high-rise up to 825 feet
Speed (fpm): 700-1200
Capacity: Passenger elevators 2100-4000 lbs